Sewing cowhide and hide do not contrast a lot from sewing different types of material. The way to sewing cowhide is to always give your stitch a shot a bit of scrap before you start the really sewing and afterward ensure you have your example precise for the piece you will sew. The reason this is so essential is that once you have stitched cowhide, in the event that you commit an error and need to fix the stitch, the calfskin will be debilitated and you will be left with holes.
Another tip is that relying upon the thickness of the cowhide or hide, you need to extend your stitch to at least three. Obviously, the thicker the seam will be, the more you have to make the length of the stitch. In the event that you make your stitch excessively small, what happens is that the calfskin is punctured excessively close together, causing tears. Another significant hint is that you should always leave long threads at both the start and end of the seams so you can tie them off by hand. The main time you would use a backstitch is the point at which the seam will be encased or crossed over by another seam. You can keep the seams together simply by setting a small, strong in the seam stipend when sewing calfskin.
As you work with patterns, you will discover that calfskin garments have the same interfacing in the same locations just as you would discover with different types of material. On the off chance that you have to fuse your calfskin, a magnificent item available called Leather Fuse is made specifically for cowhide cat may alamode. With this solution, the calfskin is fused speedier and at lower temperature settings, as not to harm the cowhide. Presently remember that on the off chance that you have to press a zone of an example down, you can by using a small measure of steam. Since calfskin goes through a quality tanning process, there is no compelling reason to stress over shrinkage. Just be sure you place a dark colored paper press material in the middle of the iron and the calfskin and never leave the iron sitting on the cowhide for long.
In the event that you are sewing calfskin with thick spots, you can use an elastic hammer to hammer them out. Be that as it may, you should secure the calfskin by covering it with paper or fabric to ensure you do not scratch or gouge the cowhide. In the event that you are sewing calfskin that is increasingly casual, you can use lapped seams. Simply topstitch to hold the seam remittance and afterward with a single-gap throat plate, you can stitch, which will keep the stitching decent and straight